Dell POWEREDGE M1000E - Manual (Page 1533)

Syslog Commands 1529
Example
The following example displays the state of logging and the syslog messages
stored in the internal buffer.
console#show logging
Logging is enabled.
Console Logging: level warnings. Console Messages: 1778
Dropped.
Buffer Logging: level informational. Buffer Messages: 983
Logged,
File Logging: level notActive. File Messages: 1783 Dropped.
CLI Command Logging : disabled
Switch Auditing : disabled
Web Session Logging : disabled
SNMP Set Command Logging : disabled
1141 Messages dropped due to lack of resources.
Buffer Log:
<190> JAN 10 16:26:53 0.0.0.0-1 NIM
[
177745344
]
:
nim_intf_map_api.c(381) 985 %% nimCheckIfNumber: incorrect
phase for operation
<190> JAN 10 16:26:53 0.0.0.0-1 NIM
[
177745344
]
:
nim_intf_map_api.c(381) 986 %% nimCheckIfNumber: incorrect
phase for operation
show logging file
Use the show logging file command in Privileged EXEC mode to display the
state of logging and the syslog messages stored in the logging file.
Syntax
show logging file
Default Configuration
This command has no default configuration.
2CSPC4.XModular-SWUM200.book Page 1529 Thursday, March 10, 2011 11:18 AM