Default configuration, Command mode, User guidelines – Dell POWEREDGE M1000E User Manual
Page 795: Example
Advertising
802.1x Commands
795
Default Configuration
If a RADIUS server has been configured on the switch, the default attribute 4
value is the RADIUS server IP address.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the NAS IP address in RADIUS attribute 4 to
192.168.10.22.
console(config)#radius-server attribute 4
192.168.10.22
2CSPC4.XModular-SWUM200.book Page 795 Thursday, March 10, 2011 11:18 AM
Advertising