Dell POWEREDGE M1000E - Manual (Page 1359)

Configuration and Image File Commands 1357
User Guidelines
This command has no user guidelines.
Example
The following example displays the contents of the startup-config file.
console#show startup-config
1 : !Current Configuration:
2 : !System Description "PowerConnect M8024, 1.0.0.0,
VxWorks6.5"
3 : !System Software Version 1.0.0.0
4 : !
5 : configure
6 : vlan database
7 : vlan 3,1000-1001
8 : exit
9 : stack
10 : member 1 1
11 : exit
12 : ip address dhcp
13 : ip address vlan 1001
14 : interface vlan 3
15 : routing
16 : exit
17 : username "lvl7" password
fb3604df5a109405b2d79ecb06c47ab5 level 15 encrypted
18 : !
19 : interface gigabitethernet 1/0/17
20 : switchport mode general
21 : switchport general pvid 1001
22 : no switchport general acceptable-frame-type tagged-only
2CSPC4.XModular-SWUM200.book Page 1357 Thursday, March 10, 2011 11:18 AM