Dell POWEREDGE M1000E - Manual (Page 124)

124 Command Groups
ipv6 mld last-member-
query-interval
Sets the last member query interval for the
MLD interface, which is the value of the
maximum response time parameter in the
groupspecific queries sent out of this
interface.
IC
(VLAN)
ipv6 mld-proxy Enables MLD Proxy on the router. IC
ipv6 mld-proxy reset-
status
Resets the host interface status parameters of
the MLD Proxy router.
IC
ipv6 mld-proxy unsolicit-
rprt-interval
Sets the unsolicited report interval for the
MLD Proxy router.
IC
ipv6 mld query-interval Sets the MLD router's query interval for the
interface.
IC
ipv6 mld query-max-
response-time
Sets MLD querier's maximum response time
for the interface.
IC
ipv6 mld router Enables MLD in the router in global
configuration mode and for a specific
interface in interface configuration mode.
GC or
IC
ipv6 mtu Sets the maximum transmission unit (MTU)
size, in bytes, of IPv6 packets on an interface.
IC
ipv6 nd dad attempts Sets the number of duplicate address
detection probes transmitted while doing
neighbor discovery.
IC
ipv6 nt managed-config-
flag
Sets the managed address configuration flag
in router advertisements.
IC
ipv6 nd ns-interval Sets the interval between router
advertisements for advertised neighbor
solicitations.
IC
ipv6 nd other-config-flag Sets the other stateful configuration flag in
router advertisements sent from the
interface.
IC
ipv6 nd prefix Sets the IPv6 prefixes to include in the router
advertisement.
IC
ipv6 nd ra-interval Sets the transmission interval between router
advertisements.
IC
Command Description Mode a
2CSPC4.XModular-SWUM200.book Page 124 Thursday, March 10, 2011 11:18 AM