Dell POWEREDGE M1000E - Manual (Page 1288)

1286 Captive Portal Commands
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP 2)#verification local
Captive Portal Client Connection Commands
captive-portal client deauthenticate
Use the captive-portal client deauthenticate command to deauthenticate a
specific captive portal client.
Syntax
captive-portal client deauthenticate macaddr
• macaddr —Client MAC address.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#captive-portal client deauthenticate 0002.BC00.1290
show captive-portal client status
Use the show captive-portal client status command to display client
connection details or a connection summary for connected captive portal
users.
2CSPC4.XModular-SWUM200.book Page 1286 Thursday, March 10, 2011 11:18 AM