Dell POWEREDGE M1000E - Manual (Page 1472)

1468 Sflow Commands
Example
console#show sflow agent
sFlow Version.......................... 1.3;Dell Corp.;10.23.18.28
IP Address............................. 0.0.0.0
show sflow destination
Use the show sflow destination command to display all the configuration
information related to the sFlow receivers.
Syntax
show sflow rcvr-index destination
• rcvr index —The index of the sFlow Receiver to display (Range: 1–8).
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
The following fields are displayed:
Example
console# show sflow 2 destination
Receiver Index The sFlow Receiver associated with the sampler/poller.
Owner String The identity string for receiver, the entity making use of this
sFlowRcvrTable entry.
Time Out The time (in seconds) remaining before the receiver is released
and stops sending samples to sFlow receiver.
Max Datagram
Size
The maximum number of bytes that can be sent in a single sFlow
datagram.
Port The destination Layer4 UDP port for sFlow datagrams.
2CSPC4.XModular-SWUM200.book Page 1468 Thursday, March 10, 2011 11:18 AM