Dell POWEREDGE M1000E - Manual (Page 854)

854 DHCPv6 Commands
FILE LOCATION: C:\My Documents\ActiveProjects\2CSPC7000-SWUM400 Dell Zeiss CLI
Guide\working\DHCPv6.fm
D E L L C O NF I D E N TI A L – P R EL I M I N A RY 3/ 1 0 / 1 1 - F O R P R O O F O N LY
DHCPv6 Malformed Packets Received.............. 0
Received DHCPv6 Packets Discarded.............. 0
Total DHCPv6 Packets Received.................. 0
DHCPv6 Advertisement Packets Transmitted....... 0
DHCPv6 Reply Packets Transmitted............... 0
DHCPv6 Reconfig Packets Transmitted............ 0
DHCPv6 Relay-reply Packets Transmitted......... 0
DHCPv6 Relay-forward Packets Transmitted....... 0
Total DHCPv6 Packets Transmitted............... 0
show ipv6 dhcp interface (Privileged EXEC)
Use the show ipv6 dhcp interface command in Privileged EXEC mode to
display configuration and status information about an IPv6 DHCP interface
or all interfaces.
Syntax
show ipv6 dhcp interface [ interface-id ]{statistics}
Syntax Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
Parameter Description
interface-id Any valid IP interface. See Interface Naming Conventions for
interface representation.
2CSPC4.XModular-SWUM200.book Page 854 Thursday, March 10, 2011 11:18 AM