Dell POWEREDGE M1000E - Manual (Page 627)

QoS Commands 627
• source-ipv6-prefix —IPv6 prefix in IPv6 global address format.
• prefix-length —IPv6 prefix length value.
Default Configuration
There is no default configuration for this command.
Command Mode
Ipv6-Class-Map Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-classmap)#match srcip6 2001:DB8::/32
match srcl4port
Use the match srcl4port command in Class-Map Configuration mode to add
to the specified class definition a match condition based on the source layer 4
port of a packet using a single keyword or a numeric notation.
Syntax
match srcl4port { portkey | port-number }
• portkey — Specifies one of the supported port name keywords. A match
condition is specified by one layer 4 port number. The currently supported
values are: domain, echo, ftp, ftpdata, http, smtp,snmp, telnet, tftp, and
www.
• port-number — Specifies a layer 4 port number (Range: 0–65535).
Default Configuration
This command has no default configuration.
Command Mode
Class-Map Configuration mode
2CSPC4.XModular-SWUM200.book Page 627 Thursday, March 10, 2011 11:18 AM