Voice vlan, Syntax, Parameter ranges – Dell POWEREDGE M1000E User Manual
Page 758: Command mode, Usage guidelines, Default value, Voice vlan (interface)
Advertising
758
Voice VLAN Commands
voice vlan
This command is used to enable the voice vlan capability on the switch.
Syntax
voice vlan
no voice vlan
Parameter Ranges
Not applicable
Command Mode
Global Configuration
Usage Guidelines
Not applicable
Default Value
This feature is disabled by default.
Example
console(config)#voice vlan
console(config)#no voice vlan
voice vlan (Interface)
This command is used to enable the voice vlan capability on the interface.
Syntax
voice vlan {
vlanid
| dot1p
priority
| none | untagged | data priority { trust |
untrust } | auth { enable | disable } | dscp
dscp
}
no voice vlan
2CSPC4.XModular-SWUM200.book Page 758 Thursday, March 10, 2011 11:18 AM
Advertising