Dell POWEREDGE M1000E - Manual (Page 553)

Multicast VLAN Registration Commands 553
Syntax
mvr querytime 1–100
no mvr querytime
Parameter Description
Default Configuration
The default value is 5 tenths of a second.
Command Mode
Global Config
User Guidelines
The following table lists the completion messages.
Example
console(config)#interface Gi1/0/1
console(config-if-Gi1/0/1)#switchport access vlan 10
console(config-if-Gi1/0/1)#mvr
console(config-if-Gi1/0/1)#mvr type receiver
console(config-if-Gi1/0/1)#mvr mode dynamic
console(config-if-Gi1/0/1)#mvr querytime 10
Parameter Description
querytime The query time is a maximum time to wait for an IGMP
membership report on a receiver port before removing the port
from the multicast group. The query time only applies to
receiver ports. The query time is specified in tenths of a second.
Message Type Message Description
Successful Completion Message Defaulting MVR query response time.
Error Completion Message None
2CSPC4.XModular-SWUM200.book Page 553 Thursday, March 10, 2011 11:18 AM