Dell POWEREDGE M1000E - Manual (Page 1289)

Captive Portal Commands 1287
Syntax
show captive-portal client [ macaddr ] status
• macaddr —Client MAC address.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal client status
Client MAC Address Client IP Address Protocol Verification Session Time
------------------ ----------------- -------- ------------ ------------
0002.BC00.1290 10.254.96.47 https Local 0d:00:01:20
0002.BC00.1291 10.254.96.48 https Local 0d:00:05:20
0002.BC00.1292 10.254.96.49 https Radius 0d:00:00:20
console#show captive-portal client 0002.BC00.1290 status
Client MAC Address........................ 0002.BC00.1290
Client IP Address......................... 10.254.96.47
Protocol Mode............................. https
Verification Mode......................... Local
CP ID..................................... 1
CP Name................................... cp1
Interface................................. 1/0/1
Interface Description..................... Unit: 1 Slot: 0 Port: 1 Gigabit -
Level
User Name................................. user123
Session Time.............................. 0d:00:00:13
show captive-portal configuration client status
Use the show captive-portal configuration client status command to display
the clients authenticated to all captive portal configurations or a to specific
configuration.
2CSPC4.XModular-SWUM200.book Page 1287 Thursday, March 10, 2011 11:18 AM