Default configuration, Command mode, User guidelines – Dell POWEREDGE M1000E User Manual
Page 266: Example, Mac address-table multicast forward- unregistered, Syntax, Parameter description, Mac address-table multicast, Mac address-table, Multicast forward
266
Address Table Commands
Default Configuration
Forward-unregistered.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
In this example, all VLAN1 Multicast packets are forwarded.
console(config)#mac address-table multicast forward-
all vlan 1
mac address-table multicast forward-
unregistered
Use the mac address-table multicast forward-unregistered command in
Global Configuration mode to enable the forwarding of unregistered
multicast addresses.
Syntax
mac address-table multicast forward-unregistered vlan
vlan-id
Parameter Description
Default Configuration
Forward-unregistered
Command Mode
Global Configuration mode
Parameter
Description
vlan
vlan-id
A valid VLAN ID (Range 1-4093).
2CSPC4.XModular-SWUM200.book Page 266 Thursday, March 10, 2011 11:18 AM