Dell POWEREDGE M1000E - Manual (Page 912)

912 IP Helper/DHCP Relay Commands
Default Configuration
The command has no default configuration.
Command Mode
User EXEC and Privileged EXEC modes
User Guidelines
This command has no user guidelines.
Example
The following example defines the Boot/DHCP Relay information.
console#show ip dhcp relay
Maximum Hop Count.............................. 4
Minimum Wait Time(Seconds)..................... 0
Circuit Id Option Mode....................... Disable
Circuit Id Option Check Mode................. Enable
show ip helper statistics
Use the show ip helper statistics command to display the number of DHCP
and other UDP packets processed and relayed by the UDP relay agent.
Syntax
show ip helper statistics
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
2CSPC4.XModular-SWUM200.book Page 912 Thursday, March 10, 2011 11:18 AM