Dell POWEREDGE M1000E - Manual (Page 367)

Email Alerting Commands 367
port (Mail Server Configuration Mode)
Use the port command in Mail Server Configuration mode to configure the
TCP port to use for communication with the SMTP server. Port can be set to
465 or 25. Use the no form of the command to revert the SMTP port to the
default port.
Syntax
port port
no port
Parameter Description
This command does not require a parameter description.
Default Configuration
The default value is 25.
Command Mode
Mail Server Configuration
User Guidelines
Port 25 is the standard SMTP port for cleartext messages. Port 465 is the
standard port for messages sent using TLSv1. Messages are always sent in
plain text mode.
username (Mail Server Configuration Mode)
Use the username command in Mail Server Configuration mode to configure
the username required by the authentication. Use the no form of the
command to revert the username to the default value.
Syntax
username username
no username
2CSPC4.XModular-SWUM200.book Page 367 Thursday, March 10, 2011 11:18 AM