Command mode, User guidelines, Example – Dell POWEREDGE M1000E User Manual
Page 1153: Area stub no-summary, Syntax, Default configuration, Area stub no, Summary
OSPFv3 Commands
1153
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example creates a stub area for area 1.
console(config)#ipv6 router ospf
console(config-rtr)#area 1 stub
area stub no-summary
Use the area stub no-summary command in Router OSPFv3 Configuration
mode disable the import of Summary LSAs for the stub area identified by
area-id .
Syntax
area
area-id
stub no-summary
no area
area-id
stub no-summary
•
area-id
— Valid OSPFv3 area identifier.
• so-summary
— Disable the import of Summary LSAs for the stub area
identified by area-id.
Default Configuration
This command has no default configuration.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
2CSPC4.XModular-SWUM200.book Page 1153 Thursday, March 10, 2011 11:18 AM