Show power-usage-history, Syntax, Parameter description – Dell POWEREDGE M1000E User Manual
Page 1564: Default configuration, Command mode, User guidelines, Example, Show power-usage, History
1560
System Management Commands
2 Yes
3 Yes
show power-usage-history
Use the show power-usage-history command in Privileged EXEC mode to
display the history of unit power consumption for the unit specified in the
command and total stack power consumption. Historical samples are not
saved across switch reboots/reloads.
Syntax
show power-usage-history
unit-id
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#show power-usage-history unit 1
Sampling Interval (sec)........................ 30
Total No. of Samples to Keep................... 168
Current Power Consumption (mWatts)............. 56172
Parameter
Description
unit-id
Stack unit for which to display the power history. Range 1-12.
2CSPC4.XModular-SWUM200.book Page 1560 Thursday, March 10, 2011 11:18 AM