Syntax description, Default configuration, Command mode – Dell POWEREDGE M1000E User Manual

Page 1248: User guidelines, Example, Vrrp track ip route

Advertising
background image

1248

Virtual Router Redundancy Protocol Commands

Syntax Description

Default Configuration

No interfaces are tracked. The default decrement priority is 10.

Command Mode

Interface Configuration (VLAN) mode.

User Guidelines

This command has no user guidelines.

Example

The following example adds VLAN 2 to the virtual router tracked list (with a

priority decrement value of 20.)

(config-if-vlan10)#vrrp 1 track interface vlan 2

decrement 20

vrrp track ip route

Use the vrrp track ip route command to track the route reachability. When

the tracked route is deleted, the priority of the VRRP router is decremented

by the value specified in the priority argument. When the tracked route is

added, the priority is incremented by the same. A VRRP configured interface

can track more than one route. When a tracked route goes down, the priority

of the router is decreased by 10 (default priority decrement) for each downed

route. By default no routes are tracked. If we specify just the route to be

tracked without specifying the optional parameter, then the default priority

will be set.

Parameter

Description

group

The virtual router identifier. (Range: 1-255)

vlan vlan-id

Valid VLAN ID.

priority

Priority decrement value for the tracked interface. (Range

: 1-

254)

2CSPC4.XModular-SWUM200.book Page 1248 Thursday, March 10, 2011 11:18 AM

Advertising