Syntax, Default configuration, Command mode – Dell POWEREDGE M1000E User Manual
Page 1478: User guidelines, Example
1474
SNMP Commands
Syntax
show snmp
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the SNMP communications status.
Console # show snmp
Community-String Community-Access View name IP address
---------------- ---------------- ---------- ----------
public
read only user-view
All
private
read write Default
172.16.1.1
private
su DefaultSuper 172.17.1.1
Community-String Group name IP address
---------------- --------- ----------
public user-group All
Traps are enabled.
Authentication trap is enabled.
Version 1,2 notifications
Target Address Type
Community Version UDP Filter TO Retries
Port name Sec
-------------- ------ --------- ------- ---- ------ --- -----
2CSPC4.XModular-SWUM200.book Page 1474 Thursday, March 10, 2011 11:18 AM