Syntax, Parameter description, Default configuration – Dell POWEREDGE M1000E User Manual
Page 419: Command mode, User guidelines, Show ethernet cfm maintenance-points local, Show ethernet cfm maintenance-points, Local
Ethernet CFM Commands
419
Syntax
show ethernet cfm domain {brief |
domain-id
}
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
This command has no user guidelines.
Example
console # show Ethernet cfm domain domain1
Domain Name : domain1
Level : 1
Total Services : 1
---- ----------------------------------- ------------------
VLAN ServiceName CC-Interval (secs)
---- ----------------------------------- ------------------
10 serv1 1
show ethernet cfm maintenance-points local
Use the show ethernet cfm maintenance-points local command in Privileged
EXEC mode to display the configured local maintenance points.
Parameter
Description
domain
Name of the maintenance domain (an alphanumeric string of
up to 43 characters in length).
2CSPC4.XModular-SWUM200.book Page 419 Thursday, March 10, 2011 11:18 AM