Show system id, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual
Page 1583: Command mode, User guidelines, Example
Advertising
System Management Commands
1579
console#
show system id
Use the show system id command in User EXEC mode to display the system
identity information.
Syntax
show system id [
unit
]
•
unit
— The unit number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
The tag information is on a switch by switch basis.
Example
The following example displays the system service tag information.
console>show system id
Service Tag: 89788978
Serial number: 8936589782
Asset tag: 7843678957
Unit
Service tag
Serial number
Asset tag
-----
------------
--------------
-----------
1
89788978
8936589782
7843678957
2
4254675
3216523877
5621987728
2CSPC4.XModular-SWUM200.book Page 1579 Thursday, March 10, 2011 11:18 AM
Advertising