Command mode, User guidelines, Example – Dell POWEREDGE M1000E User Manual
Page 1185: Show ipv6 ospf area, Syntax, Default configuration
OSPFv3 Commands
1185
Command Mode
User EXEC mode.
User Guidelines
This command has no user guidelines.
Example
console#show ipv6 ospf abr
Type
Router Id
Cost
Area ID
Next Hop
Next Hop
Intf
---- --------
----
--------
-----------------------
-----
INTRA
3.3.3.3
10
0.0.0.1
FE80::211:88FF:FE2A:3CB3
vlan11
INTRA
4.4.4.4
10
0.0.0.1
FE80::210:18FF:FE82:8E1
vlan12
show ipv6 ospf area
Use the show ipv6 ospf area command in Privileged EXEC mode to display
information about the area.
Syntax
show ipv6 ospf area
areaid
•
areaid
— Identifier for the OSPF area being displayed.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
2CSPC4.XModular-SWUM200.book Page 1185 Thursday, March 10, 2011 11:18 AM