Example, Show captive-portal status, Syntax – Dell POWEREDGE M1000E User Manual
Page 1279: Default configuration, Command mode, User guidelines
Captive Portal Commands
1277
Example
console#show captive-portal
Administrative Mode....................... Disabled
Operational Status........................ Disabled
Disable Reason................ Administrator Disabled
Captive Portal IP Address................. 1.2.3.4
show captive-portal status
Use the show captive-portal status command to report the status of all
captive portal instances in the system.
Syntax
show captive-portal status
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal status
Additional HTTP Port........................... 81
Additional HTTP Secure Port.................... 1443
Authentication Timeout......................... 300
Supported Captive Portals...................... 10
2CSPC4.XModular-SWUM200.book Page 1277 Thursday, March 10, 2011 11:18 AM