Dell POWEREDGE M1000E - Manual (Page 151)

Command Groups 151
debug clear Disables all debug traces. PE
debug console Enables the display of debug trace output on
the login session in which it is executed.
PE
debug dot1x Enables dot1x packet tracing. PE
debug igmpsnooping Enables tracing of IGMP Snooping packets
transmitted and/or received by the switch.
PE
debug ip acl Enables debug of IP Protocol packets matching
the ACL criteria.
PE
debug ip dvmrp Traces DVMRP packet reception and
transmission.
PE
debug ip igmp Traces IGMP packet reception and
transmission.
PE
debug ip mcache Traces MDATA packet reception and
transmission.
PE
debug ip pimdm Traces PIMDM packet reception and
transmission.
PE
debug ip pimsm Traces PIMSM packet reception and
transmission.
PE
debug ip vrrp Enables VRRP debug protocol messages. PE
debug ipv6 dhcp Displays debug information about DHCPv6
client activities and to trace DHCPv6 packets to
and from the local DHCPv6 client.
PE
debug ipv6 mcache Traces MDATAv6 packet reception and
transmission.
PE
debug ipv6 mld Traces MLD packet reception and transmission. PE
debug ipv6 pimdm Traces PIMDMv6 packet reception and
transmission.
PE
debug ipv6 pimsm Traces PIMSMv6 packet reception and
transmission.
PE
debug isdp Traces ISDP packet reception and transmission. PE
debug lacp Traces of LACP packets received and
transmitted by the switch.
PE
Command Description Mode a
2CSPC4.XModular-SWUM200.book Page 151 Thursday, March 10, 2011 11:18 AM