Dell POWEREDGE M1000E - Manual (Page 1120)

1120 OSPF Commands
ASBR Status.......................... Disable
Stub Router.......................... FALSE
External LSDB Overflow............... FALSE
External LSA Count................... 0
External LSA Checksum................ 0
AS_OPAQUE LSA Count.................. 0
AS_OPAQUE LSA Checksum............... 0
New LSAs Originated.................. 25
LSAs Received........................ 7
LSA Count............................ 4
Maximum Number of LSAs............... 18200
LSA High Water Mark.................. 4
Retransmit List Entries.............. 0
Maximum Number of Retransmit Entries..72800
Retransmit Entries High Water Mark... 2
NSF Support........................... Disabled
NSF Restart Interval.................. 120
NSF Restart Status.................... Not Restarting
NSF Restart Age....................... 0 seconds
NSF Restart Exit Reason............... Not Attempted
NSF Helper Support.................... Always
NSF Helper Strict LSA Checking........ Enabled
show ip ospf abr
The show ip ospf abr command displays the internal OSPF routing table
entries to Area Border Routers (ABR). This command takes no options.
2CSPC4.XModular-SWUM200.book Page 1120 Thursday, March 10, 2011 11:18 AM