Dell POWEREDGE M1000E - Manual (Page 1360)

1358 Configuration and Image File Commands
23 : switchport general allowed vlan add 1000-1001
24 : switchport general allowed vlan remove 1
25 : exit
26 : !
27 : interface gigabitethernet 1/0/3
28 : channel-group 1 mode auto
29 : exit
30 : !
31 : interface gigabitethernet 1/0/4
32 : channel-group 1 mode auto
33 : exit
34 : snmp-server community public rw
35 : exit
update bootcode
Use the update bootcode command in Privileged EXEC mode to update the
bootcode on one or more switches. For each switch, the bootcode is extracted
from the active image and programmed to flash.
Syntax
update bootcode [ unit ]
• unit —Unit number.
Default Configuration
This command has no default configuration.
2CSPC4.XModular-SWUM200.book Page 1358 Thursday, March 10, 2011 11:18 AM