Dell POWEREDGE M1000E - Manual (Page 1297)

Captive Portal Commands 1295
console(config-CP 1)#user-logout
console(config-CP 1)#no user-logout
user name
Use the user name command to modify the user name for a local captive
portal user.
Syntax
user user-id name name
• user-id —User ID (Range: 1–128).
• name —user name (Range: 1–32 characters).
Default Configuration
There is no name for a user by default.
Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines.
Example
console(config-CP)#user 1 name johnsmith
user password
Use the user password command to create a local user or change the password
for an existing user.
Syntax
user user-id password { password | encrypted enc-password }
• user-id —User ID (Range: 1–128).
• password —User password (Range: 8–64 characters).
2CSPC4.XModular-SWUM200.book Page 1295 Thursday, March 10, 2011 11:18 AM