Dell POWEREDGE M1000E - Manual (Page 1186)

1186 OSPFv3 Commands
Example
The following example displays information about area 1.
console#show ipv6 ospf area 1
AreaID........................................ 0.0.0.1
External Routing.............................. Import External LSAs
Spf Runs...................................... 0
Area Border Router Count...................... 0
Area LSA Count................................ 0
Area LSA Checksum............................. 0
Stub Mode..................................... Disable
Import Summary LSAs........................... Enable
show ipv6 ospf asbr
The show ipv6 ospf asbr command displays the internal OSPFv3 routes to
reach Autonomous System Boundary Routes (ASBR). This command takes
no options.
Syntax
show ipv6 ospf asbr
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
console#show ipv6 ospf asbr
Type Router Id Cost Area ID Next Hop Next Hop
Intf
---- --------- ---- -------- ----------------------- -------
INTRA 1.1.1.1 10 0.0.0.1 FE80::213:C4FF:FEDB:6C41 vlan10
2CSPC4.XModular-SWUM200.book Page 1186 Thursday, March 10, 2011 11:18 AM