Dell POWEREDGE M1000E - Manual (Page 142)

142 Command Groups
name Configures the name for a captive portal
configuration.
CPI
protocol Configures the protocol mode for a captive
portal configuration.
CPI
redirect Enables the redirect mode for a captive portal
configuration.
CPI
redirect-url Configures the redirect URL for a captive portal
configuration.
CPI
session-timeout Configures the session timeout for a captive
portal configuration.
CPI
verification Configures the verification mode for a captive
portal configuration.
CPI
captive-portal client
deauthenticate
Deauthenticates a specific captive portal client. PE
show captive-portal client
status
Displays client connection details or a
connection summary for connected captive
portal users.
PE
show captive-portal
configuration client status
Displays the clients authenticated to all captive
portal configurations or a to specific
configuration.
PE
show captive-portal
interface client status
Displays information about clients
authenticated on all interfaces or a specific
interface.
PE
show captive-portal
interface configuration
status
Displays the clients authenticated to all captive
portal configurations or a to specific
configuration.
PE
clear captive-portal users Deletes all captive portal user entries. PE
no user Deletes a user from the local user database. CP
show captive-portal user Displays all configured users or a specific user in
the captive portal local user database.
PE
user group Associates a group with a captive portal user.
user-logout Enables captive portal users to log out of the
portal.
CPI
Command Description Mode a
2CSPC4.XModular-SWUM200.book Page 142 Thursday, March 10, 2011 11:18 AM