Show ipv6 mld interface, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual

Page 993: Command mode, User guidelines, Show ipv6 mld, Interface

Advertising
background image

IPv6 Routing Commands

993

Group Address................................ FF1E::3

Interface..................................... vlan 6

Up Time (hh:mm:ss).......................... 00:04:23

Expiry Time (hh:mm:ss)........................ ------

Group Address................................ FF1E::4

Interface..................................... vlan 6

Up Time (hh:mm:ss).......................... 00:04:23

Expiry Time (hh:mm:ss)........................ ------

show ipv6 mld interface

The show ipv6 mld interface command is used to display MLD related

information for an interface.

Syntax

show ipv6 mld interface { vlan

vlan-id

| all }

vlan-id

— A valid VLAN id.

Default Configuration

There is no default configuration for this command.

Command Mode

Privileged EXEC mode

User Guidelines

The following information is displayed for the specified interface:

Field

Description

Interface

The interface number in unit/slot/port format.

2CSPC4.XModular-SWUM200.book Page 993 Thursday, March 10, 2011 11:18 AM

Advertising