Dell POWEREDGE M1000E - Manual (Page 830)

830 DHCP Server and Relay Agent Commands
Parameter Description
Default Configuration
There is no default NetBIOS node type configured.
Command Mode
DHCP Pool Configuration mode
User Guidelines
Use the show ip dhcp pool command to display pool configuration
parameters. The NetBIOS node type information is conveyed in the Option
46 TLV of the DHCP OFFER, DHCP ACK, DHCP INFORM ACK and
DHCP BOOTREPLY messages. Supported NetBIOS node types are:
• broadcast (b-node)
• peer-to-peer (p-node)
• mixed (m-node)
• hybrid (h-node)
Example
console(config-dhcp-pool)#netbios-node-type h-node
network
Use the network command in IP DHCP Pool Configuration mode to define a
pool of IPv4 addresses for distributing to clients.
Syntax
network network-number [ mask | prefix-length ]
Parameter Description
type The NetBIOS node type can be b-node, h-node, m-node or p-
node.
2CSPC4.XModular-SWUM200.book Page 830 Thursday, March 10, 2011 11:18 AM