Show mvr members, Syntax, Parameter description – Dell POWEREDGE M1000E User Manual
Page 560: Default configuration, Command mode, User guidelines, Examples
560
Multicast VLAN Registration Commands
show mvr members
Use the show mvr members command in Privileged EXEC mode to display
the MVR membership groups allocated.
Syntax
show mvr members [
A.B.C.D
]
Parameter Description
The parameter is a valid multicast address in IPv4 dotted notation. The
following table explains the output parameters.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
The following table lists the completion messages.
Examples
console#show mvr members
Parameter
Description
MVR Group IP
MVR group multicast IP address.
Status
The status of the specific MVR group. It can
be active or inactive.
Members
The list of ports which participates in the
specific MVR group.
Message Type
Message Description
Successful Completion Message
None
Error Completion Message
MVR disabled
2CSPC4.XModular-SWUM200.book Page 560 Thursday, March 10, 2011 11:18 AM