Dell POWEREDGE M1000E - Manual (Page 1035)

Multicast Commands 1035
Table Max Size .......................... 256
Protocol................................. PIMDM
Multicast Forwarding Cache Entry Count .. 0
show ip mcast boundary
Use the show ip mcast boundary command in Privileged EXEC mode to
display all the configured administrative scoped multicast boundaries.
Syntax
show ip mcast boundary {vlan vlan-id | all}
• vlan-id — Valid VLAN ID.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays all the configured administrative scoped
multicast boundaries.
console#show ip mcast boundary all
MULTICAST BOUNDARY
Interface Group Ip Mask
-------- ------ ---------------
2CSPC4.XModular-SWUM200.book Page 1035 Thursday, March 10, 2011 11:18 AM