Default configuration, Command mode, User guidelines – Dell POWEREDGE M1000E User Manual
Page 261: Example, Mac address-table aging-time, Syntax, Parameter description, Mac address-table aging, Time
Address Table Commands
261
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
In this example, the mac address-table tables are cleared.
console#clear mac address-table dynamic
mac address-table aging-time
Use the mac address-table aging-time command in Global Configuration
mode to set the aging time of the address. To restore the default, use the no
form of the mac address table aging-time command.
Syntax
mac address-table aging-time {
0
|
10
-
1000000
}
no mac address-table aging-time
Parameter Description
Default Configuration
300 seconds
Parameter
Description
0
Disable aging time for the MAC Address Table
10-1000000
Set the
number of seconds
aging time for the MAC Address
Table
2CSPC4.XModular-SWUM200.book Page 261 Thursday, March 10, 2011 11:18 AM