Dell POWEREDGE M1000E - Manual (Page 245)

ACL Commands 245
containing this ACL rule is applied to an interface or bound to a VLAN, then
the ACL rule is applied when the time-range with specified name becomes
active. The ACL rule is removed when the time-range with specified name
becomes inactive.
access-list
list-name {deny | permit} {every | {{icmp | igmp | ip | tcp |
udp | number } any| srcip srcmask [{eq { portkey | 0-65535 }] dstip dstmask
[{eq { portkey | 0-65535 }] [precedence precedence | tos tos tosmask | dscp
dscp ] }[log] [time-range time-range-name ] [assign-queue queue-id ]
[{mirror | redirect} interface-id ]
no access-list list-name
Parameter Description
Parameter Description
list-name Access-list name up to 31 characters in length.
deny | permit Specifies whether the IP ACL rule permits or denies an action.
every Allows all protocols.
eq Equal. Refers to the Layer 4 port number being used as match
criteria. The first reference is source match criteria, the second
is destination match criteria.
number Standard protocol number. Protocol keywords
icmp,igmp,ip,tcp,udp.
srcip Source IP address.
srcmask Source IP mask.
dstip Destination IP address.
dstmask Destination IP mask.
portvalue The source layer 4 port match condition for the ACL rule is
specified by the port value parameter (Range: 0–65535).
portkey Or you can specify the portkey, which can be one of the
following keywords: domain, echo, ftp, ftpdata, http, smtp,
snmp, telnet, tftp, and www.
log Specifies that this rule is to be logged.
time-range-name Displays the name of the time-range if the ACL rule has
referenced a time range.
2CSPC4.XModular-SWUM200.book Page 245 Thursday, March 10, 2011 11:18 AM