Dell POWEREDGE M1000E - Manual (Page 1139)

OSPF Commands 1139
Command Mode
User EXEC, Privileged EXEC modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the OSPF Virtual Interface information for
area 10 and its neighbor.
console#show ip ospf virtual-link 10 192.168.2.2
Area ID........................................ 10
Neighbor Router ID............................. 192.168.2.2
Hello Interval................................. 10
Dead Interval.................................. 655555
Iftransit Delay Interval....................... 1
Retransmit Interval............................ 5
State.......................................... down
Metric......................................... 0
Neighbor State................................. down
Authentication Type............................ MD5
Authentication Key............................. "test123"
Authentication Key ID.......................... 100
show ip ospf virtual-links brief
Use the show ip ospf virtual-link brief command in Privileged EXEC mode
to display the OSPF Virtual Interface information for all areas in the system
in table format.
Syntax
show ip ospf virtual-link brief
2CSPC4.XModular-SWUM200.book Page 1139 Thursday, March 10, 2011 11:18 AM