Dell POWEREDGE M1000E - Manual (Page 1269)

Auto-Install Commands 1267
Syntax
boot host retrycount count
no boot host retrycount
• count —The number of attempts to download a configuration (Range:
1–6).
Default Configuration
The default number of configuration download attempts is three.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines
Example
console#
console#configure
console(config)#boot host retrycount 5
console(config)#no boot host retrycount
show auto-copy-sw
Use the show auto-copy-sw command in Privileged EXEC mode to display
Stack Firmware Synchronization configuration status.
Syntax
show auto-copy-sw
Parameter Description
This command does not require a parameter description.
2CSPC4.XModular-SWUM200.book Page 1267 Thursday, March 10, 2011 11:18 AM