Dell POWEREDGE M1000E - Manual (Page 1419)

RMON Commands 1415
Default Configuration
No alarms are configured.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the following alarm conditions:
• Alarm index — 1
• Variable
identifier — 1.3.6.1.2.1.2.2.1.10.5
• Sample interval — 10 seconds
• Rising threshold — 500000
• Falling threshold — 10
• Rising threshold event index — 1
• Falling threshold event index — 1
console(config)#rmon alarm 1 1.3.6.1.2.1.2.2.1.1.10.5 10
50000 10 1 1
startup direction The alarm that may be sent when this entry is first set to valid.
If the first sample (after this entry becomes valid) is greater
than or equal to the rising-threshold, and direction is equal to
rising or rising-falling, then a single rising alarm is generated. If
the first sample (after this entry becomes valid) is less than or
equal to the falling-threshold, and direction is equal to falling
or rising-falling, then a single falling alarm is generated.
owner string Enter a name that specifies who configured this alarm. If
unspecified, the name is an empty string.
Parameter Description
2CSPC4.XModular-SWUM200.book Page 1415 Thursday, March 10, 2011 11:18 AM