Dell POWEREDGE M1000E - Manual (Page 892)

892 IGMP Proxy Commands
show ip igmp-proxy
Use the show ip igmp-proxy command in Privileged EXEC mode to display a
summary of the host interface status parameters. It displays status parameters
only when IGMP Proxy is enabled.
Syntax
show ip igmp-proxy
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays a summary of the host interface status
parameters.
console#show ip igmp-proxy
Interface Index............................... vlan13
Admin Mode.................................... Enable
Operational Mode.............................. Enable
Version....................................... 3
Number of Multicast Groups.................... 0
Unsolicited Report Interval................... 1
Querier IP Address on Proxy Interface......... 0.0.0.0
Older Version 1 Querier Timeout............... 0
Older Version 2 Querier Timeout............... 0
2CSPC4.XModular-SWUM200.book Page 892 Thursday, March 10, 2011 11:18 AM