Dell POWEREDGE M1000E - Manual (Page 395)

Ethernet Configuration Commands 395
VLAN Deletes................................... 0
Time Since Counters Last Cleared... 0 day 18 hr 1 min 59 sec
show statistics switchport
Use the show statistics command in Privileged EXEC mode to display
detailed statistics for a specific port or for the entire switch.
Syntax
show statistics { interface-id |switchport}
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
It is possible to enter interface configuration mode from global configuration
mode or from interface configuration mode.
Example
The following example shows statistics for the entire switch.
console#show statistics switchport
Total Packets Received (Octets)................ 0
Packets Received Without Error................. 0
Parameter Description
interface-id Interface id. See Interface Naming Conventions for interface
representation.
switchport Displays statistics for the entire switch.
2CSPC4.XModular-SWUM200.book Page 395 Thursday, March 10, 2011 11:18 AM