Dell POWEREDGE M1000E - Manual (Page 1164)

1164 OSPFv3 Commands
overflow state. The router never holds more than the external LSDB limit
non-default AS-external- LSAs in it database. The external LSDB limit
MUST be set identically in all routers attached to the OSPF backbone and/or
any regular OSPF area.
Syntax
external-lsdb-limit limit
no external-lsdb-limit
• limit — External LSDB limit for OSPF (Range: -1-2147483647)
Default Configuration
-1 is the default value for limit .
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example sets the external LSDB limit at 100 for OSPF.
console(config)#ipv6 router ospf
console(config-rtr)#external-lsdb-limit 100
ipv6 ospf
Use the ipv6 ospf command in Interface Configuration mode to enable
OSPF on a router interface or loopback interface.
Syntax
ipv6 ospf
no ipv6 ospf
2CSPC4.XModular-SWUM200.book Page 1164 Thursday, March 10, 2011 11:18 AM