Examples, Show link-dependency, Syntax – Dell POWEREDGE M1000E User Manual
Page 530: Default configuration, Command mode, User guidelines, Example
530
Link Dependency Commands
Examples
console(config-linkDep-group-1)#depends-on
gigabitethernet 1/0/10
console(config-linkDep-group-1)#depends-on port-
channel 6
show link-dependency
Use the show link-dependency command to show the link dependencies
configured for a particular group. If no group is specified, then all the
configured link-dependency groups are displayed.
Syntax
show link-dependency [
group GroupId
]
•
GroupId
— Link dependency group identifier. (Range: Valid Group Id,
1–16)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
No specific guidelines
Example
The following command shows link dependencies for all groups.
console#show link-dependency
GroupId
Member Ports
Ports Depended On
-------
--------------------- ----------------------------------
2
1/0/1-4
1/0/8-9
3
1/0/5
po3
5
1/0/3-4
1/0/10
2CSPC4.XModular-SWUM200.book Page 530 Thursday, March 10, 2011 11:18 AM