Dell POWEREDGE M1000E - Manual (Page 1505)

SSH Commands 1501
78
SSH Commands
Management access to the switch is supported via telnet, SSH, or the serial
console. The PowerConnect supports secure shell (SSH) and secure sockets
layer (SSL) to help ensure the security of network transactions.
Keys and certificates can be generated externally (that is, offline) and
downloaded to the target or generated directly by the PowerConnect.
Commands in this Chapter
This chapter explains the following commands:
crypto key generate dsa
Use the crypto key generate dsa command in Global Configuration mode to
generate DSA key pairs for your switch. A key pair is one public DSA key and
one private DSA key. Use the no form of the command to remove the
generated key from the local file system.
Syntax
crypto key generate dsa
no crypto key generate dsa
Default Configuration
DSA key pairs do not exist.
crypto key generate dsa key-string
crypto key generate rsa show crypto key mypubkey
crypto key pubkey-chain ssh show crypto key pubkey-chain ssh
ip ssh port show ip ssh
ip ssh pubkey-auth user-key
ip ssh server
2CSPC4.XModular-SWUM200.book Page 1501 Thursday, March 10, 2011 11:18 AM