Dell POWEREDGE M1000E - Manual (Page 682)

682 Spanning Tree Commands
console(config)#interface te1/1/1
console(config-if-Te1/1/1)#switchport mode trunk
console(config-if-Te1/1/1)#switchport trunk allowed vlan
add 2-150
console(config-if-Te1/1/1)#spanning-tree mst 1 port-
priority 16
console(config-if-Te1/1/1)#interface te1/1/2
console(config-if-Te1/1/2)#switchport mode trunk
console(config-if-Te1/1/2)#switchport trunk allowed vlan
add 200-349
console(config-if-Te1/1/2)#spanning-tree mst 2 port-
priority 16
console(config-if-Te1/1/2)#exit
name (mst)
Use the name command in MST mode to define the configuration name. To
return to the default setting, use the no form of this command.
Syntax
name string
• string — Case sensitive MST configuration name. (Range: 1-32
characters)
Default Configuration
Bridge address.
Command Mode
MST mode
User Guidelines
This command has no user guidelines.
2CSPC4.XModular-SWUM200.book Page 682 Thursday, March 10, 2011 11:18 AM