Dell POWEREDGE M1000E - Manual (Page 81)

Command Groups 81
Address Table
show service-acl interface Displays the status of LLPF rules configured on
a particular port or on all the ports.
PE
show ip access-lists Displays an Access Control List (ACL) and all
of the rules that are defined for the ACL.
PE
show mac access-list Displays a MAC access list and all of the rules
that are defined for the ACL.
PE
a. For the meaning of each Mode abbreviation, see Mode Typeson page 77.
Command Description Mode a
clear mac address-table Removes any learned entries from the
forwarding database.
PE
mac address-table aging-
time
Sets the address table aging time. GC
mac address-table multicast
filtering
Enables filtering of Multicast addresses. GC
mac address-table multicast
forbidden address
Forbids adding a specific Multicast address to
specific ports.
IC
mac address-table multicast
forbidden forward-
unregistered
Forbids a port to be a forwarding-unregistered-
multicast-addresses port.
IC
mac address-table multicast
forward-all
Enables forwarding of all Multicast packets on a
port.
IC
mac address-table multicast
forward-unregistered
Enables the forwarding of unregistered
multicast addresses.
IC
mac address-table multicast
static
Registers MAC-layer Multicast addresses to the
bridge table, and adds static ports to the group.
IC
mac address-table static Adds a static MAC-layer station source address
to the bridge table.
IC
port security Disables new address learning on an interface. IC
Command Description Mode a
2CSPC4.XModular-SWUM200.book Page 81 Thursday, March 10, 2011 11:18 AM