Command mode, User guidelines, Example – Dell POWEREDGE M1000E User Manual

Page 1246: Vrrp timers learn, Syntax, Default configuration

Advertising
background image

1246

Virtual Router Redundancy Protocol Commands

Command Mode

Interface Configuration (VLAN) mode.

User Guidelines

This command has no user guidelines.

Example

The following example sets the frequency at which the VLAN 15 virtual

router 5 sends a virtual router advertisement.

console(config-if-vlan15)#vrrp 5 timers advertise 10

vrrp timers learn

Use the vrrp timers learn command in Interface Configuration mode to

configure the router, when it is acting as backup virtual router for a Virtual

Router Redundancy Protocol (VRRP) group, to learn the advertisement

interval used by the master virtual router. Use the no form of the command to

prevent the router from learning the advertisement interval from the master

virtual router.

Syntax

vrrp

group

timers learn

no vrrp

group

timers learn

group

— The virtual router identifier. (Range: 1-255)

Default Configuration

Timer learning is disabled by default and the router uses the configured

advertisement.

Command Mode

Interface Configuration (VLAN) mode.

User Guidelines

This command has no user guidelines.

2CSPC4.XModular-SWUM200.book Page 1246 Thursday, March 10, 2011 11:18 AM

Advertising