Isdp timer, Syntax, Parameter description – Dell POWEREDGE M1000E User Manual
Page 295: Default configuration, Command mode, User guidelines, Example, Show isdp
Advertising
CDP Interoperability Commands
295
isdp timer
The isdp timer command sets period of time between sending new ISDP
packets. The range is given in seconds. Use the “no” form of this command to
reset the timer to the default.
Syntax
isdp timer
time
no isdp timer
Parameter Description
Default Configuration
The default timer is 30 seconds.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the isdp timer value to 40 seconds.
console(config)#isdp timer 40
show isdp
The show isdp command displays global ISDP settings.
Syntax
show isdp
Parameter
Description
time
The time in seconds (range: 5–254 seconds).
2CSPC4.XModular-SWUM200.book Page 295 Thursday, March 10, 2011 11:18 AM
Advertising