Show ip igmp, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual
Page 882: Command mode, User guidelines, Example
Advertising
882
IGMP Commands
console(config-if-vlan15)#ip igmp version 2
show ip igmp
Use the show ip igmp command in Privileged EXEC mode to display system-
wide IGMP information.
Syntax
show ip igmp
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays system-wide IGMP information.
console#show ip igmp
IGMP Admin Mode............................. Enabled
IGMP Router-Alert check..................... Disabled
IGMP INTERFACE STATUS
Interface Interface-Mode Operational-Status
--------- -------------- ----------------
vlan 3
Enabled
Non-Operational
2CSPC4.XModular-SWUM200.book Page 882 Thursday, March 10, 2011 11:18 AM
Advertising