Reload, Syntax, Parameter description – Dell POWEREDGE M1000E User Manual
Page 1554: Default configuration, Command mode, User guidelines, Example
1550
System Management Commands
----10.1.1.1 PING Statistics----
4 packets transmitted, 4 packets received, 0% packet
loss
round-trip (ms) min/avg/max = 7/8/11
reload
Use the reload command in Privileged EXEC mode to reload stack members.
Syntax
reload [
stack–member–number
]
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
If no unit is specified, all units are reloaded.
Example
The following example displays how to reload the stack.
console#reload 1
Management switch has unsaved changes.
Would you like to save them now? (y/n)n
Configuration Not Saved!
Are you sure you want to reload the switch? (y/n) y
Parameter
Description
stack–member–number
The stack member to be reloaded.
2CSPC4.XModular-SWUM200.book Page 1550 Thursday, March 10, 2011 11:18 AM