Dell POWEREDGE M1000E - Manual (Page 1613)

User Interface Commands 1609
84
User Interface Commands
This chapter explains the following commands:
enable
Use the enable command in User EXEC mode to enter the Privileged EXEC
mode.
Syntax
enable
Default Configuration
The default privilege level is 15.
Command Mode
User EXEC mode
User Guidelines
If there is no authentication method defined for enable, then a level 1 user is
not allowed to execute this command.
Example
The following example shows how to enter privileged mode.
console>enable
console#
enable mode simple
end mode-change confirm
exit quit
2CSPC4.XModular-SWUM200.book Page 1609 Thursday, March 10, 2011 11:18 AM