Dell POWEREDGE M1000E - Manual (Page 1462)

1458 Serviceability Tracing Packet Commands
debug sflow
Use the debug sflow command to enable sFlow debug packet trace. Use the
“no” form of this command to disable sFlow packet tracing.
Syntax
debug sflow packet
no debug sflow packet
Default Configuration
Display of sFlow traces is disabled by default.
Command Mode
Privileged EXEC mode.
Usage Guidelines
There are no usage guidelines for this command.
Example
console#debug sflow packet
debug spanning-tree
Use the debug spanning-tree command to trace spanning tree BPDU packet
reception and transmission. The receive option traces only received spanning
tree BPDUs and the transmit option traces only transmitted BPDUs. When
neither keyword is used in the command, all spanning tree BPDU traces are
dumped. Vital information such as source address, destination address,
control packet type, packet length, and the interface on which the packet is
received or transmitted is displayed on the console. Use the “no” form of this
command to disable tracing of spanning tree BPDUs.
Syntax
debug spanning-tree bpdu [ receive | transmit ]
no debug spanning-tree bpdu [ receive | transmit ]
2CSPC4.XModular-SWUM200.book Page 1458 Thursday, March 10, 2011 11:18 AM